MICROVAC-II

Download Microvac-II Brochure
Download Microvac-II Operation Manual
Download Microvac Rebuild Manual
Go to SPARE PARTS page
Online Warranty Registration

 

EVEN FASTER SPEED

Enjoy faster more reliable recovery -- larger ¾-hp oil free compressor easily services larger cooling systems

Finish sooner -- 30% faster recovery rates versus our previous Microvac design
 

MORE DURABLE

Don’t "baby sit" the liquid recovery process -- special ball valve prevents slugging and premature compressor failure (below left)

Enjoy longer service life -- 10-inch vacuum switch automatically halts recovery to prevent compressor from running against a deep vacuum, which causes premature wear to components

Worry less -- top handle shields valves, ports and gauges for better protection.   Rugged double-walled plastic housing absorbs shock and abrasion
 

EASIER TO OPERATE

Simplify recovery -- turn just two hand valves to perform self-evacuation and recovery in fewer steps

Start recovery then do other things – automatically halts vapor recovery when process is complete

Comfortably tote the compact 30-lb unit to your job site by its included shoulder strap
 

EASY TO FIELD SERVICE

Prevent downtime -- compressor may be overhauled in the field with simple tools and readily available spare parts in about 30 minutes
Novel discharge ball valve is impervious to damage by heavy liquid flow.  <Click> for details on the new PlatinumPlus oil free compressor

 
Optional Accessory
KIT002      Float cable kit  (115/110V)
KIT003      Float cable kit  (230/220V)

Field install float kit includes 6-ft cable (3-pin), tank full lamp, & bypass switch.  Kit is easily installed on the Microvac II unit.  Download installation instructions below.    <click> Installation Instructions





Specifications
Recovery Rates (lb/min) Vapor Hi-temp Vapor Liquid Push/pull
R22 0.31 0.33 5.04 14.01
R410a 0.33 n/a 6.23 16.17
Dimensions (lxwxh) 13.5" x 9" x 17"
Weight 30-lb (38-lb shipping)
Compressor 0.75-hp oil free

 
Order nr.

 

  

MVSII-115

MicroVac-II  (115/60/1,110/50/1)

  
MVSII-240 MicroVac-II  (230/60/1,220/50/1)

  Includes:

·         Shoulder carrying strap

  

 

·         3-cubic inch filter element
 

  

 

Easier to Operate

1) Start recovery with both valves in SELF EVAC position to remove air from hoses & internal components  - within seconds the unit shuts off on a 10-inch internal vacuum. 

2) Turn both valves to RECOVER position.  Open ports on the recovery tank & cooling system to start refrigerant transfer.  Open manifold set wide and walk away - no need to "baby sit" the process.  Unit automatically turns ON and when a 10-inch vacuum is achieved in the cooling system it automatically turns OFF to protect compressor components from excessive wear.



3) Close ports on the cooling system & turn both valves to SELF EVAC to restart the unit and clear refrigerant from intake hose and internal components.  Again, within a few seconds a 10-inch vacuum is pulled and the unit shuts off -- recovery complete.