|
Chiller Purge Unit: High Speed
Air Removal from Low or High Pressure Refrigerants
 |
Portable,
Universal High Speed!
 |
|
|
l |
On
board compressor greatly accelerates purge speed by actively pulling vapor from the
cooling system, separating noncondensibles by compression, and forcing processed
refrigerant liquid back into the cooling system. |
|
l |
Only
system that eliminates air from both high or low pressure refrigerants. |
|
l |
Smallest
and lightest purge unit on the market. At 65-lbs in weight, it is easily hand carried. |
|
l |
Vapor
is pumped through a high capacity condenser then compressed in a purge vessel.
Microprocessor controls calculate the most efficient time to purge noncondensibles. |
|
l |
Achieves
discharge efficiency as high as 0.2 lb-refg/lb-noncondensibles on high pressure
refrigerants. Many times more efficient than thermal purge units on the market. |
|
l |
MiniPurge
portable purge unit temporarily connects to chillers and storage tanks charged with high
or low pressure refrigerants and rapidly eliminates noncondensibles. Unit is ideal for
supplementing thermal purge units during seasonal start ups on R11 or R123 chillers.
A 0.5hp compressor draws refrigerant vapor, pumps it through a condenser, and compresses
it in a stainless steel purge vessel. Condensed refrigerant is forced back to the cooling
system or recovery tank. When pressure rises to a certain point, noncondensibles are
discharged with virtually no loss of refrigerant. |
| specifications |
|
Discharge
High Pressure
Discharge Low Pressure (R123) |
0.20-lb
refrigerant/lb-noncondensibles
0.08-lb refrigerant/lb-noncondensibles |
| Dimensions
|
36”L
x 10”W x 16” H |
| Weight
|
65-lbs
|
| Connections
|
3/8”
flare |
| Warranty
|
1-year
parts |
| Power
|
115/60/1,
110/50/1, 15A, 0.5hp
230/60/1, 220/50/1, 15A, 0.5hp |
|
| part number |
power options |
| MPS-115 |
115/60/1, 110/50/1, 0.5HP, 20A |
| MPS-240 |
230/60/1, 220/50/1, 0.5HP, 15A |
|
